Table of Contents
Advertisement
FILTR Revolution
The Temperature slider bar points indicate those temperatures above/below which the
FILTR app will trigger an alert for the unit.
Apple OS users will not see the Yellow section, though the range is stored the same.
The PM and VOC slider bars give the Admin the ability to set an upper alarm limit for the
volume of contaminants measured, generating an email alert when those values are
exceeded.
Green = Acceptable Level
Saving Settings
At the bottom of the Alarm Settings page are two options for saving any information
changed in the Alarm Settings screen.
The left-pointing arrow will return the user to the Main Screen without saving any
changes.
"Save" is used to save changed values for the current Revolution unit only. This is the
button that must be pressed in order to save a Room or Unit name change.
"Apply Globally" saves Alarm Threshold settings only, but it will apply those settings to
all Revolution units that the user is Admin for and that have the same Room name. This
enables identical settings to be applied to multiple units at once.
After all settings are changed and saved, press the left-facing arrow button to return to
the Main Screen.
248083486-1 R2
Green = optimum range
Red= Alarm, email alert
Operators Manual
Yellow = within 15% of limit
Red= Limit Exceeded,
email alert
29
Advertisement
Table of Contents
