Table of Contents
Advertisement
FILTR Revolution
Graph View
The FILTR app has the ability to display collected Sensor Pack data in graph form via the
Graph View screen.
First, locate the Tile Selector icon on the Revolution unit tile that
graphed data is desired for. This icon is in the lower right corner of the tile.
Tap on the icon and it will change to have a checkmark inside of it.
This indicates that the data from the tile will be used on the Graph screen.
Two units can be displayed on the graph simultaneously. (By default, the first device
listed will already be checked. The user can change this at any time).
Press the Graph Screen icon at the bottom of the Home Screen.
This will open up the Graphs screen as shown below.
RH
The icon bar at the top allows the user to
select the type of collected data to graph.
Users can zoom in and out on the graph using
normal touchscreen techniques.
The x and y axis on the graph will dynamically
scale according to the data being displayed.
The Range bar at the bottom allows the user
to select the time range of historical data to be
displayed on the graph.
The Graph Screen allows the user to graph data from either the Relative Humidity,
Temperature, PM, or VOC sensor, and to vary the amount of rolling historical data
shown from one day, one week, or one month, within the limit of historical data
available.
Any units selected for graphing will show in the bar near the top, and have their graph
lines color coded per the color of the unit descriptor shown.
248083486-1 R2
Temperature
PM
VOC
Operators Manual
Figure 4-22
31
Advertisement
Table of Contents
