Table of Contents
Advertisement
Operators Manual
Ceiling Mounting
An alternative to the wall mounting option is the ceiling mounting kit. This allows the
Revolution to be hung from overhead supports, providing filtering in places that may
not have available ground or wall space.
The Revolution Ceiling Mount kit does not come with overhead anchors, or ropes or
cables for use in hanging the unit.
The Revolution Ceiling Mounting kit comes with the following parts:
Install Upper Bracket
The first step in installing the Ceiling Mount Brackets is to determine which side of the
Revolution unit will be towards the ceiling. It is suggested to keep both the side with the
Keypad and the side with the Power Port accessible and visible from the ground.
Once the side facing the ceiling is determined, place one of the Ceiling Mount Brackets
on top of the Revolution with the anchor point towards the "ceiling side" of the unit.
Secure the bracket to the unit using three of the Unit Bracket screws.
Install 3 screws
Figure 5-11
46
Figure 5-10
Face towards "ceiling side"
Ceiling Mount Bracket (2)
Unit Bracket screw (6)
Ensure bracket angles away
from the Revolution body
Figure 5-12
FILTR Revolution
248083486-1 R2
Advertisement
Table of Contents
