Table of Contents
Advertisement
FILTR Revolution
4. Open the Wireless Network settings on your
phone or laptop and search for access points.
The Revolution unit will come up listed as
FILTR-XX:XX:XX. Connect to the access point
that corresponds to your Revolution unit's ID.
5. Open your phone or computers web browser
and enter filtrconnect.com in the address
bar.
6. Enter the SSID of your Wifi router in the
"Network Name" field, or click "Refresh"
under Detect Device and select the Access
Point to which you want the unit to connect.
NOTE: Revolution devices can only connect
to 2.4GHz, 802.11 b/g/n access points.
7. Enter the Wifi password in the "Password"
field.
8. Leave the "Device Name" field blank.
9. Click "Connect".
10. At this point, the unit will disconnect from
the phone or laptop and initiate its own
connection with the selected Wifi router. The
browser may display a disconnection page,
this is normal.
11. The Wifi Status LED will turn a solid green when the connection is complete,
indicating the connection to your Wifi router and the cloud server.
12. Open the FILTR App to register your device. See Chapter 4 for information about
using the FILTR app.
248083486-1 R2
Operators Manual
Figure 3-7
Figure 3-8
17
Advertisement
Table of Contents
