Table of Contents
Advertisement
Operators Manual
Turning the Ionizer On and Off
The Ionizers operation can be controlled from the keypad.
Press both the (+) and (-) buttons on the keypad and hold them down. Any illuminated
flow LEDs will go dark, then after three seconds the bottom flow LED will illuminate.
Release the buttons then to toggle the Ionizer on/off.
With the Ionizer activated, the flow LEDS will
display as shown in Figure 3-4.
To turn the Ionizer off, press both the (+) and (-) buttons for three seconds then release
them.
14
Figure 3-3
FILTR Revolution
Ionizer Toggle Indicator
Figure 3-4
248083486-1 R2
Advertisement
Table of Contents
