Chapter 10
4 Backing up and Restoring
The Hydro-Control VI database, including the system parameters, recipes and mix logs, can be
backed-up to a USB memory stick. This facilitates the restoring of the Hydro-Control VI in the event
of a fault or user error.
The back-up database can also be viewed, edited and restored using the HC06 Database Editor
software HS0100. The database editor is available free of charge from the Hydronix web site
www.Hydronix.com. For more details about the database editor see the HC06 Database Editor
User Guide HD0583.
Backup
4.1
To backup the Hydro-Control database (System and Recipe Parameters and Mix Log):
1.
Insert a memory stick into one of the USB ports.
2.
Press the Menu button
3.
Press the System Parameters button
4.
Press the Backup/Restore button
5.
Press the Backup button.
6.
When successful, press OK to return to the parameters screen
.
.
.
Hydro-Control VI Operators Guide HD0456 Rev 1.7.1
Using the Mix Log
67
Need help?
Do you have a question about the Hydro-Control VI and is the answer not in the manual?