The Main Menu; Figure 3: The Menu Screen - Hydronix Hydro-Control VI Operator's Manual

Hide thumbs Also See for Hydro-Control VI:
Table of Contents

Advertisement

Chapter 2

4 The Main Menu

Pressing the button marked menu in the bottom right hand corner of the Overview Screen will
display the menu screen (See Figure 3). This allows access to the different areas of the Hydro-
Control VI.
Version number
4.1
The first line displays the version number of the software currently running.
Buttons
4.2
Overview
Displays the overview screen from which you can control the mix cycle and view details about
the batch and recipe currently in use.
Recipe Overview
Displays the user defined recipes stored in the system and allows the user to create, edit, and
delete recipes.
Mix Log
Displays a list of previously run batches and allows the user to view information about the
previous batches and also to calibrate the system from a batch.
IO Setup
Allows configuration and test of the inputs and outputs. Configuration instructions are detailed
in the Installation Guide (HD0455).
Sensor Configuration
Displays the sensor configuration screen allowing changes to the filtering and analogue output.
Configuration instructions are detailed in the Installation Guide (HD0455).

Figure 3: The Menu Screen

Hydro-Control VI Operators Guide HD0456 Rev 1.7.1
Navigation
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hydro-Control VI and is the answer not in the manual?

Table of Contents