Hydronix Hydro-Control VI Operator's Manual page 63

Chapter 10
Column
Wet Mix Value*
Wet Mix Deviation*
Pre-wet Water
Main Water
Target Water
Automatic Trim
Manual Trim
Addition Error
Total Water
Water/Cement Ratio
Initial Mix Time
Pre-wet Mix Time
Dry Mix Time
Wet Mix Time
Water Addition Time
Total Time
Dry Weight
Units Description
This is the moisture value taken during the Averaging
%/US
Time or Auto-track time at the end of the Wet Mix.
%/US This is the deviation in the signal taken during the
Averaging Time or Auto-track time at the end of the Wet
Mix.
l/gal/sec/lbs/kg This is the quantity of Pre-Wet Water that was added.
l/gal/sec/lbs/kg This is the quantity of Main Water that was added.
l/gal/sec/lbs/kg This is the amount of water that was calculated as being
needed. This is the target for the Main Water Addition.
l/gal/sec/lbs/kg This is the automatically calculated Trim value that was
added during the calibration of the recipe.
l/gal/sec/lbs/kg This is the amount of water that the operator selected to
add or subtract manually during the batch.
l/gal/sec/lbs/kg This is the difference between the actual quantity
calculated for the batch and the amount actually added
as recorded by the flow meter.
l/gal/sec/lbs/kg This is the total amount of water added to the mixer by
the Hydro-Control during the batch.
This is the ratio of the water in the batch calculated from
the average moisture value during the wet mix and the
dry weight (and so assumes the moisture calibration has
been entered as a real moisture value) to the amount of
cement added into the mixer.
Seconds This is the initial Mix Time of the batch.
Seconds This is the pre-wet Mix Time of the batch.
Seconds This is the Dry Mix Time of the batch.
Seconds This is the Wet Mix Time of the batch.
Seconds This is the total time taken to add the water during the
batch.
Seconds This is the total mix time, from the time that the start
signal is received by the Hydro-Control to the time that
the Hydro-Control activates the Mix Complete signal.
Kg/lbs This is the dry weight of the batch.
Hydro-Control VI Operators Guide HD0456 Rev 1.7.1
Using the Mix Log
63