Hydronix Hydro-Control VI Operator's Manual page 38

Running the First Mix
Task
Select the new recipe from the Recipe List, then select
Menu.
Select Overview to return to the Main Overview screen.
Start the mix cycle
2.3
Task
Make sure that the batch control is set so that the mix will not
be discharged automatically.
consistency to be checked.
On the Overview Screen, press the Start button.
Alternatively, start the mix cycle using the batch control
system.
Wait for the cycle to finish.
Trim the water manually to reach the desired consistency
2.4
Task
Check the consistency of the mix.
On the Overview Screen, press the Trim button to
select the trim function options.
Either:
To add a set quantity of water, enter the amount of
water to add and press "Auto Trim"
or
To add water manually, press the "Manual Trim"
button to open the water valve. The water valve will
remain open until the button is released.
Repeat the previous step until the mix is at the
desired consistency, and then press the Finish
button.
38 Hydro-Control VI Operators Guide HD0456 Rev 1.7.1
This will allow the mix
Action
If possible, observe the mix in the mixer
through the inspection hatch to see if more
water is needed.
Press
Press
Action
Press
Press
Action
Press
Chapter 7