7.4
Repairs
The following may require repairs by the manufacturer or an authorised service partner:
• Liquid has penetrated the device.
• The performance has significantly decreased.
• Inexplicable notifications appear.
• Abnormal noises occur.
• Functional faults cannot be rectified according to the measures in chapter Malfunctions and
troubleshooting [ page 22].
If defects are detected, the product may not be used any longer.
Make a note of the deficiencies and the REF number on the data plate and inform your
responsible ATMOS representative.
Observe the information in chapter Sending in the device [ page 23].
7.5
Service hotline
+49 7653 689-0
7.6
Type plate position
Fig. 4: Type plate
7.7
Sending in the device
Remove and properly dispose of consumables.
Clean and disinfect the product and accessories according to the operating instructions.
Place used accessories with the product.
Fill in the form QD 434 'Delivery complaint / return shipment' and the respective
decontamination certificate.
This form is enclosed with each delivery and can be found at www.atmosmed.com.
The device must be well padded and packed in suitable packaging.
Place the form QD 434 'Delivery complaint / return shipment' and the respective
decontamination certificate in an envelope.
Affix the envelope to the outside of the package.
Send the product to ATMOS or to your dealer.
1 1
2 2
Position of the type plate (1).
Remove the cover (2) to see the type plate.
7
Maintenance
Repairs
23
GA 5752 5678 GB 07