Definitions; Design Of Safety Notes; Design Of Other Notes; Symbols Used - Atmos MEDAP LS FLOW Operating Instructions Manual

1
Introduction
How to use these operating instructions
1.2.3

Definitions

1.2.3.1

Design of safety notes

Pictogram
Tab. 1:
1.2.3.2

Design of other notes

Notes not referring to personal injury or property damage are used as follows:
Pictogram
Tab. 2:
1.2.4

Symbols used

Symbols are attached to products, type plates and packaging.
Symbols
6
GA 5752 5678 GB 07
Descriptor
DANGER!
Indicates a direct and immediate risk to
persons which may be fatal or result in
most serious injury.
WARNING!
Indicates a potential risk to persons or
property which may result in health hazard
or grave property damage.
CAUTION!
Indicates a potential risk to property which
may result in property damage.
Design of safety notes
Descriptor
NOTE
ENVIRONMENT
Design of other notes
Identification
Labelling for products which were developed and are marketed in
compliance with the Medical Devices Directive 93/42/EEC. Class Is, Im, IIa,
IIb and III products are also marked with the identifying number for the
4
Notified Body.
Labelling in compliance with the ISO 15223-1 standard.
Symbol for 'Serial number'.
Labelling in compliance with the IEC 60601-1 standard.
Symbol for 'Follow operating instructions'.
Reference to
Supplementary assistance or further useful information.
Information regarding proper disposal.
Text
The text for the safety note
describes the type of risk and
how to avert it.