Disinfection; General; Suitable Disinfectants - Atmos MEDAP LS FLOW Operating Instructions Manual

6
Cleaning and disinfection

Disinfection

6.4 Disinfection
6.4.1

General

6.4.2

Suitable disinfectants

Only surface disinfectants based on the following combinations of active ingredients may be used
for disinfection:
• Aldehydes
• Quaternary compounds
• Guanidine derivatives
Ingredient group
Aldehydes
Quaternary compounds
20
GA 5752 5678 GB 07
NOTE
In the event that product surfaces are very dirty, carry out an additional cleaning
procedure before disinfecting.
WARNING!
Property damage!
Disinfectants that contain volatile aromatic hydrocarbons, ammonia, amine, ester,
halogenated hydrocarbons and / or ketone may attack plastics made of
polycarbonate.
Do not use disinfectants with these ingredients.
CAUTION!
Material damage due to excessive exposure times!
Exceeding the specified exposure time of the disinfectant may damage the
surfaces.
Observe the specified exposure time of the disinfectant manufacturer.
NOTE
Heavily diluted disinfectants may be used for disinfection.
Active ingredients
2-ethyl-1-hexanal, formaldehyde, glutardialdehyde, glyoxal,
o-phthaldialdehyde, succinaldehyde
Alkyl-didecyl-polyoxethyl ammonium propionate, alkyl-dimethyl-
alkylbenzyl ammonium chloride, alkyl-dimethyl-ethyl ammonium
chloride, alkyl-dimethyl-ethylbenzyl ammonium chloride,
benzalkonium propionate, benzalkonium chloride (alkyl-dimethyl-
benzyl ammonium chloride, coco-dimethyl-benzyl ammonium
chloride, lauryl-dimethylbenzyl ammonium chloride, myristyl-
dimethyl-benzyl ammonium chloride), benzethonium chloride,
benzyl-dihydroxyethyl-coco-alkyl ammonium chloride, dialkyl-
dimethyl ammonium chloride (didecyldimethyl ammonium chloride),
didecyl-methyl-oxyethyl ammonium propionate, mecetronium-ethyl
sulfate, methyl-benzethonium chloride, n-octyl-dimethyl-benzyl
ammonium chloride