Configuring The Printer - Epson EPL-N2000 User Manual

Configuring the printer

Follow these steps to configure the printer:
1. Select Print Manager from the Main group.
2. Choose Create Printer from the Printer menu at the top of
the screen. The Create Printer dialog box appears.
3. Type a name for the printer in the Printer Name field.
4. Select the printer driver from the Driver pull-down menu.
5. Select Other from the Print To pull-down menu. The Print
Destinations dialog box appears.
6. Choose [HP Network Port] from the Available Print
Destinations list. The Add an HP Network Peripheral Port
dialog box appears.
Note:
If HP Network Port does not appear as a choice in the dialog box,
then the DLC transport protocol and driver are not installed. Go
to the "Installing DLC in Windows NT" section above for
installation instructions.
7. Type a name for the port in the Name box.
Note:
The name must not be identical to an existing port, such as
LPT1, or any other existing DOS device.
8. Select LAN Hardware Address (Node Address) from the
card Address list. This address matches the one listed
under Node Number on the status sheet.
9. Click the Timer button and select the Job Oriented option.
Then click OK.
Using Windows
3-27