Using Macintosh - Epson EPL-N2000 User Manual

Chapter 4

Using Macintosh

This chapter describes how to configure the Ethernet card with
EPSON Net! for Macintosh. If you use AppleTalk, you can use
the EPSON Net! utility program to configure the Ethernet card.
Note:
The EPSON Net! utility software only configures the Ethernet card
to work with specific protocols that may exist on your network. It does
not imply that you can use all protocols mentioned above in your
operating system. Protocols the Ethernet card can really use vary
depending upon operating systems and network configuration.
Before you start configuring the Ethernet card, make sure of the
following points:
The correct printer driver must be installed in the
Macintosh system.
EPSON Net! for Macintosh can configure fhe Ethernet card
for AppleTalk, NetWare, and TCP/IP.
The configurations about Novell NetWare File Server, print
queue and others are required to use PCONSOLE. EXE
after configuring the NetWare part of the Ethernet card.
Before continuing, be sure to connect the Ethernet card to the
network and turn on the printer. For details, see Chapter 1 in
this manual and the user's guide of your printer.
Using Macintosh
4
4-1