Installing Epson Net! For Windows; Monitoring The Printers On Your Network - Epson EPL-N2000 User Manual

To use TCP/IP with Windows NT, you must install
TCP/IP on the network. For details, see your operating
system documentation.
If you use Windows NT, decide whether you want to use
the Ethernet card with DLC support. For details, see the
appropriate section in this chapter.

Installing EPSON Net! for Windows

To install EPSON Net! for Windows, follow these steps:
1. Make sure Windows is running, the Ethernet card is
connected to the network, and the printer is turned on.
2. Insert the EPSON Net! for Windows disk in drive A (or B).
3. Choose Run from the File menu in Windows 3.1 or Windows
NT, or choose Run from the Start menu in Windows 95.
4. Type a:install.exe (or b:install.exe) and click OK.
5. Follow the instructions on the screen.
After installation is complete, EPSON Net! for Windows
appears in the EPSON Net! group or folder.

Monitoring the Printers on Your Network

You can monitor the printers connected to your network
according to the protocol they use, and you can also check their
status.
3-2
Using Windows