Epson EPL-N2000 User Manual page 75

2. Click Print Server.
3. The default printer name appears in the Print Server name
box. If you want to rename the printer, simply type any
new name (up to 47 characters) in the box.
Note:
If you want to set up the Ethernet card to serve a print queue
in one file server, input the file server name in the File Server
#1 box. If you want to set up the card to serve print queues in
multiple file servers leave the File Server #1 box blank.
If you can not log in to the file server or can not set the print
queue, make changes to one or more of the following settings
and try again; Print Server Name, File Server #1, and
Polling Time. Then save these settings, and set the queue by
using PCONSOLE as described in "Creating a print server
by PCONSOLE," below. In step 3 of that section, if you can
not find the name of your print server in the Print Server
Name list, press the Insert key on your keyboard and input
the File Server name.
4. Set the polling time from 5 (factory default) to 90 seconds.
The print server searches print queues (in files servers) for
print jobs at the specified polling intervals.
Using Macintosh
4-9