Using The Ethernet Card In Remote Printer Mode - Epson EPL-N2000 User Manual

Finishing the configuration
When finished with the NetWare Configuration dialog box,
follow these steps:
1. Click OK to return to the Summary dialog box. When you
click Update, only the new settings are sent to the Ethernet
card without closing the Config dialog box.
c
2. Click Exit to exit EPSON Net! for Macintosh.
After configuring the Ethernet card in Print Server mode, be
sure to set up Novell NetWare to use the configured print
server. For more information, see your NetWare
documentation.

Using the Ethernet card in Remote Printer mode

See the following sections to use the Ethernet card as a remote
printer.
Defining the Ethernet card in NetWare
Before configuring the Ethernet card in Remote Printer mode,
you must set up a print server and print queue using
PCONSOLE or the NetWare Administrator utility in DOS or
Windows. For more information, see your NetWare
documentation.
When setting up the printer for NetWare, remember the print
server name and the printer port number to which you will
assign the Ethernet card. They are important for a remote
printer.
Caution:
Once you make changes to the Ethernet card, you must wait
for at least five minutes before turning off or rebooting your
printer.
Using Macintosh
4-11