Getting Printer Driver Status Information - Epson EPL-N2000 User Manual

RPRINT 1090328F /LPT3
RPRINT 10903605
6. Re-boot the LAN Server file server and make sure the driver
starts successfully.
All printed output spooled to this file server will be redirected
to the remote printer interface specified above. Also after
typing "RPRINT <serial number> (/portname)" at the OS/2
command prompt, this redirection will be worked immediately.

Getting printer driver status information

To make sure the printer driver is working, type RSTAT at the
OS/2 command prompt. RSTAT will return a one line status
report for each printer driver served. For example:
ITC Remote Print Servers active for LPT1—Printer Ready
or, if the printer driver in use, it returns the following if only
one port is selected:
ITC Remote Print Servers active for LPT1—Printer Busy
If several ports are redirected, RSTAT returns a message
similar to the following:
ITC Remote Print Servers active for LPT1—Printer Busy
ITC Remote Print Servers active for LPT2—Printer Ready
ITC Remote Print Servers active for LPT3—Printer Ready
Causes print files directed to LPT3 to be
received by an interface with the serial
number 1090328F.
Causes print files directed to LPT1 to be
received by an interface with the serial
number 10903605.
6-3
Using OS/2