Using The Ethernet Card In Remote Printer Mode - Epson EPL-N2000 User Manual

Using the Ethernet card in Remote Printer mode

See the following sections to use the Ethernet card in Remote
Printer or Auto Print Server/Remote Printer mode.
Attaching to a print server
To set up the Ethernet card in Remote Printer mode, you must
assign a print server and print queue to the Ethernet card. If
you have not set up a print server and print queue, you can do
so using PCONSOLE or the NetWare Administrator utility in
DOS or Windows. For more information, see your NetWare
documentation.
It is a good idea to write down the print server name and the
printer port number to which you will assign the Ethernet card.
They will be required in the steps below.
The following steps explain how to assign a print server and
print queue to an Ethernet card functioning in Remote Printer
mode:
1. From any NetWare workstation, log in to the network with
supervisor privileges.
Note:
If you use NetWare 4.x, menu screens will differ slightly and
Bindery Emulation has to be selected. Press F4 to switch between
Directory Services and Bindery Emulation.
2. Type PCONSOLE at the DOS prompt.
3. From the Available Options screen, select Print Server
Information and press Enter. Next, select the print server
name from the Print Servers list and press Enter.
4. From the Print Server Information list, select Print Server
Configuration and press Enter.
3-14
Using Windows