Epson EPL-N2000 User Manual page 15

The Introduction and Chapter 1 should be read first. Read these
sections to get overall information about the Ethernet card
hardware and software. The Appendix is for your reference.
For information about how to use the utility software in your
operating system, refer to the appropriate chapter as follows:
DOS: see Chapter 2 for information on EPSON Net! for
NetWare DOS. This chapter describes how to configure the
Ethernet card in DOS for Novell NetWare.
Windows 3.1, Windows 95, and Windows NT: see Chapter 3
for information on EPSON Net! for Windows and
configuration in Windows NT with DLC support. This chapter
describes how to configure the Ethernet card in Windows to
work with Novell NetWare, TCP/IP, and AppleTalk protocols.
Macintosh: see Chapter 4 for information on EPSON Net! for
Macintosh. This chapter describes how to configure the
Ethernet card with a Macintosh to work with AppleTalk,
TCP/IP, and Novell NetWare protocols.
UNIX: see Chapter 5 for details about using several variations
of UNIX. This chapter includes information about using UNIX
with TCP/IP.
OS/2: see Chapter 6 for details on using an OS/2 system and
installing extra software.
EPSON Status Monitor: Chapter 7 contains details on
installing and using the EPSON Status Monitor utility. This
utility is available for use on a network and requires Windows
95 or Windows NT 3.51.
7
Introduction