Application For Configuring Printer Operations (Web Config); Application For Updating Software And Firmware (Epson Software Updater) - Epson Expression Home XP-2200 Series User Manual

Table of Contents

Advertisement

Product Information

Application for Configuring Printer Operations (Web Config)

Web Config is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can confirm the printer status or change the network service and printer settings. To use the
Web Config, connect the printer and the computer or device to the same network.
The following browsers are supported.
Microsoft Edge, Internet Explorer 8 or later, Firefox
*
Use the latest version.
Note:
The initial value of the Web Config administrator password is the serial number of the printer. Check the label attached to
the printer.
The label attachment position depends on the product; it may be on the back, the open side of the cover, or the bottom.
Running Web Config on a Web Browser
1. Check the printer's IP address.
Hold down the
button for at least 5 seconds to print the network status sheet, and then check the printer's
IP address.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the product information screen of the Epson Smart Panel.
Since the printer uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser
when you start Web Config; this does not indicate a problem and can be safely ignored.
Application for Updating Software and Firmware (Epson Software
Updater)
Epson Software Updater is an application that installs new software, and updates firmware over the Internet. If you
want to check for update information regularly, you can set the interval for checking for updates in Epson Software
Updater's Auto Update Settings.
Starting on Windows
❏ Windows 11
Click the start button, and then select All apps > EPSON Software > Epson Software Updater.
>
>
Software Information
*
, Chrome
Application for Updating Software and Firmware (Epson Softwar
*
*
, Safari
153
...

Advertisement

Table of Contents
loading

Table of Contents