Epson EPL-N2000 User Manual page 53

5. Select Printer Configuration from the menu and then press
Enter.
6. From the Configured Printers list, select a port number and
press Enter.
7. From the Printer configuration screen, type the printer name.
Next, highlight the Type and press Enter. Select Remote
LPT1.
8. Press Esc; then press Enter to save changes.
9. Select Queues Serviced by Printer from the Print Server
Configuration menu and assign a queue to the print server
port from the Available Queues list.
10. Press Esc to exit.
Configuring the Ethernet card as a remote printer
After setting up the NetWare print server, follow these steps to
configure the Ethernet card in Remote Printer mode:
1. Start EPSON! Net for Windows.
2. Click NetWare in the Summary dialog box.
3. Highlight the printer you want to configure from the list.
Note:
If you have connected more than one printer with the same type of
Ethernet card to the network, you can distinguish which card is
which using the card's unique serial numbers. Press the status
sheet button on the Ethernet card plate to print a status sheet for
each printer and check the serial numbers.
4. Click Open.
Using Windows
3-15