Application For Configuring Printer; Operations (Web Config); Application For Updating Software And; Firmware (Epson Software Updater) - Epson WF-2960 Series User Manual

Product Information
Application for Configuring Printer Operations (Web Config)
Web Config is an application that runs in a web browser, such as Microsoft Edge and Safari, on a computer or
smart device. You can confirm the printer status or change the network service and printer settings. To use the
Web Config, connect the printer and the computer or device to the same network.
The following browsers are supported. Use the latest version.
Microsoft Edge, Internet Explorer, Firefox, Chrome, Safari
Note:
You may be asked to enter the administrator password while operating Web Config. See the related information below for
more details.
Related Information
"Default Value of the Administrator Password" on page 16
&
Running Web Config on a Web Browser
1. Check the printer's IP address.
Select the network icon on the printer's home screen, and then select the active connection method to confirm
the printer's IP address.
Note:
You can also check the IP address by printing the network connection report.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the product information screen of the Epson Smart Panel.
Since the printer uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser
when you start Web Config; this does not indicate a problem and can be safely ignored.
Application for Updating Software and Firmware (Epson Software
Updater)
Epson Software Updater is an application that installs new software, and updates firmware over the Internet. If you
want to check for update information regularly, you can set the interval for checking for updates in Epson Software
Updater's Auto Update Settings.
Note:
Windows Server operating systems are not supported.
> >
Software Information Application for Updating Software and Firmware (Epson Softwar
211
...