Installing Epson Net! For Netware Dos - Epson EPL-N2000 User Manual

Installing EPSON Net! for NetWare DOS

EPSON Net! for NetWare DOS is EPSON's proprietary
network printer management utility program. Follow these
steps to install it.
1. At a workstation with a high-density disk drive, insert the
EPSON Net! for NetWare DOS disk in drive A (or B).
2. Use the DOS COPY command (copy a:filename.*) to copy
the following files to a network directory or to your hard
drive:
EPNWDE.EXE
EPNWDE.DAT
Note:
To configure the Ethernet card with EPSON Net! for NetWare
DOS, you must first log in to the NetWare network with
supervisor privileges.
This utility requires a minimum of 480 KB of conventional
memory.
2-2
Using DOS