Changing The Configuration In Print Server Mode - Epson EPL-N2000 User Manual

Changing the configuration in Print Server mode

In Print Server mode, you can use EPSON Net! for NetWare
DOS to do the following:
Rename the print server
Set a password
Set the queue polling time
Before editing the Ethernet card configuration, you must first
log in to the network with supervisor privileges.
Renaming the print server
Always use EPSON Net! for NetWare DOS to rename the print
server name in the Ethernet card. PCONSOLE can not change
the print server name in the Ethernet card.
1. Access the NetWare config dialog box, and type the new print
server name in the Print Server name box. You can type up
to 32 characters. The following characters are not allowed:
Ctrl / \ : ; , * | + = [ ] " and space. A period (.) is allowed if
it is not the first character.
2. Click Save.
Setting the password
A password is required to connect to a restricted file server,
EPSON Net! for NetWare DOS can set the password, also make
the encrypted password.
To make the password, follow these steps:
2-8
Using DOS