Configuring The Ethernet Card For Appletalk; Configuring The Card - Epson EPL-N2000 User Manual

Configuring the Ethernet Card for AppleTalk

If you want to use the printer on an AppleTalk network, you
must configure the card for AppleTalk.

Configuring the card

Use EPSON Net! for Macintosh to configure the Ethernet card
for AppleTalk, and choose AppleTalk depending on your
system.
1. Open the EPSON Net! folder and double-click the EPSON
Net! for Macintosh icon.
2. Highlight the printer you want to configure from the list.
Note:
If you have connected more than one printer with the same type of
Ethernet card to the network, you can distinguish them with the
Ethernet card's unique serial numbers. Print a status sheet for
each printer and check the serial number.
3. Click Open in the Summary dialog box.
Using Macintosh
4-5