Installing Redirection Software - Epson EPL-N2000 User Manual

Installing Redirection Software

Follow these steps to install the redirection software:
1. Place the EPSON Net! for OS/2 Installation disk in drive A
(or B) of your PC.
2. Open an OS/2 full screen command session.
3. Open the OS2 directory on drive A (or B) and select the
PIPE\REDIRECT directory. For example, type CD
TCPIP\REDIRECT\PIPE and press the Enter key.
4. Copy the driver software files RPRINT.EXE and RSTAT.EXE
to the root directory of the LAN Server file server.
5. Edit the file STARTUP.CMD in the file server root directory
and insert the following command as the last line:
Note:
Print a status sheet for each printer to check for the serial number.
The optional [/portname] designates the port that will be
redirecting to the remote printer. If no optional port name
is defined, the program assumes LPT1 as the port.
The following are examples of commands that can be added
to the STARTUP.CMD:
RPRINT 10900416 /LPT1
RPRINT 10900701 /LPT2
6-2
Using OS/2
COPY A:*.* C:\
RPRINT <serial number> [/portname]
Causes print files directed to LPT1 to be
received by an interface with the serial
number 10900416.
Causes print files directed to LPT2 to be
received by an interface with the serial
number 10900701.