No special utility software is needed for the DLC transport
protocol of Windows NT and the protocol of UNIX network. You
can use OS-standard utility software tools.
Ethernet Card Hardware
The Ethernet card comes pre-installed in your printer. It has
connectors for either an Ethernet Thin Coaxial (10BASE2) or an
Ethernet Twisted-Pair (10BASE-T) network connection. The lights
and buttons are provided to help you monitor and operate the
Ethernet card. For more information about the hardware aspects of
the card, see Chapter 1.
Ethernet Card Software
The utility software that comes with your printer includes the
following programs used to configure the Ethernet card on a
network:
EPSON Net! for NetWare DOS is an easy-to-use, menu-driven
utility program that runs in DOS. Use it to configure the
Ethernet card for NetWare in DOS.
EPSON Net! for Windows and EPSON Net! for Macintosh are
easy-to-use, menu-driven utility programs that run in
Windows and Macintosh respectively. Use the appropriate one
to configure the Ethernet card for NetWare, TCP/IP (available
only for Windows), and AppleTalk.
2
Introduction