Selecting An Input Line As A Source Signal For A Camera; Function - Basler Racer User Manual

AW00118508000
5.5.1.3

Selecting an Input Line as a Source Signal for a Camera

Function

You can select an input line as the source signal for the Line Start Trigger.
Note that to use an input line as the source signal for a camera function, you must apply a signal to
the input line that is appropriately timed for the function.
For detailed information about selecting an input line as the source signal for the camera's Line Start
Trigger function, see Section 6.1 on
Default Input Line Selection
Line CC1 is selected as the source signal for the camera's Line Start Trigger function.
Basler racer Camera Link
page 55.
Physical Interface
46