Error Detection; Led Indicator - Basler Racer User Manual

AW00118508000

8.10 Error Detection

8.10.1

LED Indicator

The LED indicator on the back of the camera includes both a small red LED and a small green LED.
The LED indicator signals the camera's current condition as shown in Table 20.
LED State
Red and Green Both Off
Continuous Green
Flashing Green
Green and Red Both Flashing
Alternately
Flashing Red
Table 20: LED Indications
During the camera bootup process, the red and the green LED will simultaneously
be lit.
Basler racer Camera Link
Status Indication
No power to the camera
The camera has booted up successfully and is OK.
The camera is set to expect a hardware trigger signal on an input, but no
trigger signal is present.
An error condition has been detected that may be correctable with user
intervention. (See Section 8.10.2 on
Internal error. Contact Basler technical support.
page 135 for more information).
Features
134