26-Pin Sdr Connectors - Basler Racer User Manual

AW00118508000
5.2.2

26-pin SDR Connectors

Two 26-pin, 0.03" pin spacing, Shrunk Delta Ribbon (SDR) female connectors are used to transmit
video data, control signals, and configuration commands.
The base Camera Link SDR connector can also be used to supply power to the cameras in
accordance with the Power over Camera Link (PoCL) specifications in the Camera Link standard.
Note that only the 2k and 4k cameras can be fully operated using PoCL. For more information about
correctly supplying power for full camera operation, see Section 5.4.3 on
The pin assignments and pin numbering are shown in Table 7 on
SDR connector and in Table 8 on
A suitable cable is available from Basler. See the Basler website for information about cable
characteristics. For voltage requirements of camera power, see Section 5.4 on
Basler racer Camera Link
page 37 for the medium/full Camera Link SDR connector.
page 42.
page 36 for the base Camera Link
page 40.
Physical Interface
35