Input Related Signals As Output Signals - Basler Racer User Manual

AW00118508000
To select the line trigger wait signal as the source signal for the CL Spare line via direct
register access:
Set the value of the Line Source CL Spare register to Line Trg Ready.

For more information about direct register access, see Section 3.2 on
6.3.4

Input Related Signals as Output Signals

The camera allows selecting the output signal of the frequency converter module and assigning it
to the camera's CL Spare output line. In this fashion input signals can be passed through a camera
to trigger additional cameras.
In this case, setting a minimum output pulse width may be necessary to ensure output signal
detection.
For more information about selecting the source signal for the CL Spare output line on the camera,
see Section 5.5.2.3 on
For more information about the minimum output pulse width feature, see Section 5.5.2.1 on
page 48.
Basler racer Camera Link
page 49.
Acquisition Control
page 28.
86