Danfoss VLT AutomationDrive FC 303 Instruction Manual page 26

Installation
1
Figure 2.16 Installation to Achieve a Stopping Category 0 (EN 60204-1) with Safety Cat. 3 (EN 954-1) / PL "d" (ISO 13849-1).
1 Safety device Cat. 3 (circuit interrupt device, possibly
with release input)
2 Door contact
3 Contactor (Coast)
4 Adjustable frequency drive
5 Line power
6 Control board
Safe Stop Commissioning Test
After installation and before first operation, perform a commissioning test of the installation making use of safe stop.
Moreover, perform the test after each modification of the installation.
VLT ® AutomationDrive Instruction
Manual
3
2
11
10
7 Inverter
8 Motor
9 5V DC
10 Safe channel
11 Short-circuit protected cable (if not inside installation cabinet)
®
MG.33.AI.22 - VLT is a registered Danfoss trademark
4
12
37
9
5
2
6
7
8
M
2-13
2