Paper Output; Using The Tray Extension - Xerox DocuPrint 4512 Setup Manual

Network laser printer
Hide thumbs Also See for DocuPrint 4512:
Table of Contents

Advertisement

P a p e r H a n d l i n g

Paper Output

Using the Tray
Extension
2-14
D o c u P r i n t 4 5 1 2 / 4 5 1 2 N U s e r G u i d e
Printed items are delivered face down to the output tray. The output tray
supports up to 250 sheets of 80 g/m
larger sheet sizes and helps to neatly stack large volumes of output.
The Tray Extension is inserted into the slots on the back of the printer as
shown in Figure 2.12. (It may have already been installed as part of the
procedure described in the Setting Up Guide.)
Figure 2.12 The Tray Extension
You will probably find it convenient to leave the Tray Extension
permanently in place. However should you want to remove it, grasp the
bottom of the bracket and gently pull it out.
2
paper. A Tray Extension supports

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint 4512n

Table of Contents