Xerox DocuPrint 4512 Setup Manual page 63

Table 3.4 Using the Control Panel to set printer operation (continued)
Key Press
Task
Sequence
Change the baud On Line
rate setting.
Menu
Controls the rate at
Menu
which data is
transferred between
Menu
the computer and the
printer through the
Item
optional serial
interface. Up
Down
Choices:
300, 600, 1200, 2400,
Enter
4800, 9600, 19200,
38400, 57600 On Line
Change the data On Line
bit setting.
Menu
Controls a
Menu
communications
parameter for the
Menu
optional serial
interface.
Item
Choices:
Item
8, 7
Up
Down
Enter
On Line
Action/Response
†
Takes the printer off-line.
Displays the Job Menu.
Displays the Config Menu.
Displays the Serial Menu (if present).
Displays the Baud Rate item.
or Changes the baud rate setting.
Saves the new value.
Returns the printer on-line.
Takes the printer off-line.
Displays the Job Menu.
Displays the Config Menu.
Displays the Serial Menu (if present).
Displays the Baud Rate item.
Displays the Data Bit item.
or Changes the data bit setting.
Saves the new value.
Returns the printer on-line.
C h a p t e r 3 : T h e C o n t r o l P a n e l
U s i n g t h e C o n t r o l P a n e l
Display Shows
Printing Menu
Job Menu
Config Menu
Serial Menu
Baud Rate=X
Baud Rate=N
Baud Rate=N
PCL 5e A4/A4
Printing Menu
Job Menu
Config Menu
Serial Menu
Baud Rate=X
Data Bit=X
Data Bit=N
Data Bit=N
PCL 5e A4/A4
Table 3.4 Page 6 of 9
*
*
*
*
*
3-13