Preparing The Printer For Transport - Xerox DocuPrint 4512 Setup Manual

Preparing the
Printer for
Transport
C h a p t e r 7 : P r i n t e r M a i n t e n a n c e a n d C o n s u m a b l e s
P r i n t e r M a i n t e n a n c e a n d C o n s u m a b l e s
When transporting the printer more than a short distance, use the
original shipping box and packaging materials. If the original shipping
box or materials are not available, use a sturdy packing box and a
generous amount of cushioning or packing materials.
To prepare your printer for transportation, follow the instructions below.
Power OFF the printer and disconnect the power cord and all
1
interface cables.
Remove any paper handing options and repack each in its original
2
packaging.
3 Remove the Photoconductor / Drum and pack it in its original
packaging.
4 Remove the Toner Cartridge and pack it in its original packaging.
5 Pack the printer with the sealed Photoconductor / Drum, Toner
Cartridge and power cord in the original printer box.
If you need to return the printer for service, follow the instructions of
your service provider for packing and shipping.
7-13