Table of Contents
Advertisement
A s s e m b l i n g t h e P r i n t e r
Remove the Photoconductor / Drum from its
5
wrapper and insert it vertically into the slots
on the sides of the printer's interior.
The photosensitive drum is easily
damaged. Do not touch it or expose it to
direct light.
Carefully remove the sheet of black protective
7
paper from the Photoconductor / Drum.
Be sure not to leave any torn pieces of
paper in the printer.
8
S e t t i n g U p G u i d e
Pivot the Photoconductor / Drum down toward
6
the back of the printer until it falls into place
horizontally.
Rotate the fuser cover to the rear.
8
Advertisement
Chapters
Table of Contents
