Paper Tray Loading; Paper Trays; Adjusting Trays For Paper Size - Xerox DocuPrint 4512 Setup Manual

Paper Tray
Loading

Paper Trays

Adjusting Trays for
Paper Size
1
Side guide
2
End guide
Paper and other print media are loaded into the upper and lower trays
identically. Refer to Table 2.1 on page 2-3 for acceptable paper sizes.
The DocuPrint 4512 provides the following paper trays:
• The upper and lower trays each hold 250 sheets of 20 lb (75 g/m
paper.
• The optional High Capacity Feeder holds 1,000 sheets of 20 lb (75
2
g/m ) paper.
• An optional Envelope Tray holds up to 20 envelopes and replaces
the upper paper tray for automatic envelope loading.
Figure 2.1 shows how to adjust the upper and lower paper trays for
different paper sizes.
Figure 2.1 Upper/Lower tray paper
adjustment guides
The width guide ( 1 ) slides to fit the width of the paper.
The end guide ( 2 ) slides to fit the length of the paper.
Proper orientation of media in the paper and envelope trays is discussed
in the following sections.
C h a p t e r 2 : P a p e r H a n d l i n g
P a p e r H a n d l i n g
2
)
2-5