Setting Up Paper Trays - Xerox WorkCentre 4250C User Manual

11 Setups

Setting up Paper Trays

Paper Settings
Default Stock
The Default Stock settings allows the programming of the default paper type and
color. Typically, this is the most common stock that will be used in the machine and
is the stock that the machine will feed if a specific stock type is not selected.
Tools > Paper Tray Management > Paper Setting > Default Stock
Paper Substitution
This feature enables the machine to automatically substitute common US and
metric paper sizes when printing.
If the feature has been turned off, the machine will hold the job and indicate that
the appropriate paper size should be loaded. If this feature is set to On, the
machine will automatically substitute the sizes shown on the screen below.
Tools > Paper Tray Management > Paper Setting > Paper Substitution
Default Paper Size
The Default Paper Size settings allows the programming of the default paper size.
Set the default size to either 8.5 x 11" (refers to Letter and Legal sizes) or A4 (297
x 210mm).
Tools > Paper Tray Management > Paper Setting > Default Paper Size
Xerox WorkCentre 4250/4260 User Guide 175