Certification To 1999/5/Ec Radio Equipment And Telecommunications Terminal Equipment Directive - Xerox WorkCentre Pro 75 Operator's Manual

Safety notes
Certification to 1999/5/EC Radio Equipment and Telecommunications
Terminal Equipment Directive
2-4
Changes or modifications to this equipment not specifically
approved by Xerox Europe may void user's authority to
operate the equipment. Shielded cables must be used with
this equipment to maintain compliance with the EMC
Directive (89/336/EEC).
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
This system is certified manufactured and tested in
compliance with strict safety and radio frequency
interference regulations. Any unauthorized alteration which
includes the addition of new functions or the connection of
external devices may impact this certification. Please
contact your local Xerox Europe representative for a list of
approved accessories.
Shielded cables must be used with this equipment to
maintain complacence with the EMC Directive (89/336/EEC).
This equipment is not primarily intended for use in a
domestic environment.
In order to allow this equipment to operate in proximity to
industrial, scientific and medical (ISM) equipment, the
external radiation from the ISM equipment may have to be
limited or special mitigation measures taken.
This Xerox product has been self-certified by Xerox for pan-
European single terminal connection to the analogue public
switched telephone network (PSTN) in accordance with Directive
1999/5/EC.
The product has been designed to work with the national PSTNs
and compatibles PBXs of the following countries:
WARNING
WARNING
WARNING
WARNING
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Operator Guide