Xerox WorkCentre Pro 75 Operator's Manual page 26

Safety notes
Do not do these
2-14
• Always locate the printer in an area that has adequate
ventilation and room for servicing. Refer to the space
requirements in the DocuTech/DocuPrint 75/90 and
DocuPrint 75 MX Installation Planning Guide.
• Always use materials and supplies that are specifically
designed for your Xerox equipment. Use of unsuitable
materials may result in poor performance and possibly a
hazardous situation.
To ensure the continued safe operation of your printer:
• Never use an adapter plug to connect equipment to a power
source that lacks a ground connection terminal.
• Never obstruct ventilation openings. They are provided to
prevent overheating.
• Never push objects of any kind into the ventilation openings.
• Never attempt any maintenance function that is not
specifically described in the DocuTech/DocuPrint 75/90 and
DocuPrint 75 MX documentation.
• Never remove any covers or guards that are fastened with
screws. There are no operator serviceable areas within these
covers.
• Never locate the printer near a radiator or any other heat
source.
• Never override or "cheat" any of the electrical or mechanical
interlock devices.
• Never operate the equipment if you notice unusual noises or
odors. Disconnect the power cord from the power outlet and
call the Xerox Welcome Center.
Your Xerox DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
printer is certified, manufactured, and tested in compliance with
strict safety and radio frequency interference regulations. Any
unauthorized alteration that includes the addition of new
functions or the connection of external devices may invalidate
this certification. Please contact your local Xerox representative
or the Xerox Welcome Center for a list of approved accessories.
Welcome Center phone numbers:
• USA - (800) 821-2797
• Canada - (800) 939-3769
• Europe - Local Welcome Centre
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Operator Guide