Xerox WorkCentre Pro 75 Operator's Manual page 60

Paper and other stock
This edge must be between 6.7 to 18 inches (170 to 457
mm) to be printed on both sides (duplexed).
Tray 5
5-2
Figure 5-1. Size requirement for duplex printing
Tray capabilities: The trays are shown in
Figure 5-2. Tray capabilities
Tray 5
Tray 6
The Bypass Tray has a capability of 4 to 12 inches (102 to 305
mm); 5.83 to 18 inches (148 to 457 mm).
Feed Direction
The dimension of this
edge is controlled by the
tray.
Trays 1 - 4
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Operator Guide
Figure 5-2.