Xerox WorkCentre Pro 75 Operator's Manual page 53

Operator Guide
Area 1
Area 2
Area 3
Area 3a
Area 3e
Area 4
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Figure 4-8. Jam clearance areas
Sheets may be left in this area when jams occur.
The Lift Handle: The printer is programmed to circulate paper to
this area in the event of a jam. Raise the handle to clear this
area. Do not move the handle to the left. Ensure that the handle
is fully locked by lowering it before closing the Front Door or the
handle may be blocked or damaged.
The Fuser area: This area includes areas 3b, 3c, and 3d. Access
these areas by pulling the green handle.
Look beneath the label to find the sheet. Do not push down or lift
up on the label.
Open the top 2 trays to access this area. Look for dropped
sheets in the areas to the right of and below Trays 3 and 4.
The Duplex area: Look for sheets on top of the open space.
Maintenance
4-11