Unloading The Stacker During Printing; Peripheral Hardware Components - Xerox WorkCentre Pro 75 Operator's Manual

Product overview

Unloading the Stacker during printing

Peripheral hardware components

3-12
If it is necessary to unload the Stacker during printing, use the
following procedure:
1. Press the Finisher button.
2. Wait for the printer to finish producing the set being printed.
3. Wait while the Stacker Tray is automatically lowered.
4. Unload the Stacker Tray.
5. Press the Finisher button again to continue operations.
You may have peripheral components such as an External SCSI
Hard Drive, External Tape Drive, and an External Modem on a
special accessory shelf as shown in
Figure 3-11. Special accessory shelf
Figure 3-11.
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Operator Guide