Loading And Handling; Storing - Xerox WorkCentre Pro 75 Operator's Manual

Paper and other stock

Loading and handling

Storing

5-12
Before loading paper, unwrap the paper from the moisture
resistant wrappings, discard the wrapper and insert the paper in
the tray. If it is special stock such as punched paper follow the
orientation label on the tray or the recommendations in
4. and Table 5-6. of this chapter. Fanning the paper edges is not
required, but may be beneficial with certain stocks in dry
environments.
Damaged, curled, or damp paper can cause jams and image
quality problems.
Follow these simple rules for storing paper:
• Store paper in dry conditions, away from extreme heat or
cold, such as radiators or open windows.
• Lay the paper flat on a shelf or pallet above floor level.
• If possible, leave the paper wrapped and boxed until you are
ready to use it; otherwise, re-wrap partly used packages of
paper.
NOTE: Paper stored in extremely humid environments (for
example, left in a printer over an extended period of time) may
have to be replaced with fresh stock in order to ensure optimal
feeding and image quality.
DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
Operator Guide
Table 5-