Recommendations For Loading Special Stock - Xerox WorkCentre Pro 75 Operator's Manual

Operator Guide

Recommendations for loading special stock

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
The printer performance for new and recycled 8.5 x 11 inches
(216 to 279 mm) or A4 paper for various weights is shown in
Table 5-5.
Table 5-5. Printer performance for new and recycled plain paper
Paper Weight
Throughput Material 8.5 x 11 in. or A4
Less than 16 lb or 61 gsm
Between 16-20 lb or 61-75 gsm
Between 20-32 lb or 75-120 gsm
Between 32-110 (index) lb or 120-203 gsm
Greater than 110 (index) lb or 203 gsm
The common uses and the special requirements for the variety of
stock types that the printer can accommodate are shown in
5-6.
Table 5-6. Recommendations for loading special stock
Stock Type Common Use
Hole-punched Ringed binders
3 or 4 holes
NOTE: Cannot
Dual Staple due to
hardware
limitations. Dual
stapling drilled
stock will cause
jams in the
finisher.
Perforated Pages for partial
removal, such as
order forms and
receipts
Paper and other stock
Rating Note
x
o
l
u
x
Recommendation
• Use long-edge feed paper for
best imaging speed.
• Load with holes on the left in
Trays 5-6.
• Load with holes on the right in
Trays 1-4.
• Where possible, load with the
perforations parallel to the
feed direction.
l
Table
5-9