Paper And Other Stock; Performance Information; Paper Handling Guidelines - Xerox WorkCentre Pro 75 Operator's Manual

Performance information

Table 3-1
Table 3-2
Table 3-3
Table 3-4
Table 3-5

Paper handling guidelines

DocuTech/DocuPrint 75/90 and DocuPrint 75 MX
5.

Paper and other stock

Your printer can process a variety of paper and other stock to
accommodate your needs.
This chapter contains information about the stock you can use in
the printer and how you can expect it to perform. Stapling
guidelines and the correct loading of special stocks is also
discussed as well as stock storage requirements.
The following tables list the printer performance expectations for
both one-sided and two-sided printing, on paper and on other
stock.
Staple capability for Various Paper Weights
Printer Performance for Standard Paper 20 lb or 75 gsm (USA
paper size)
Printer Performance for Standard Paper 80 gsm (Xerox Europe
paper size)
Printer performance for Non-standard Paper and Other Stock
Printer Performance for New and Recycled Plain Paper
Paper handling and/or image quality performance degradation
might occur in the following situations:
• Lower quality paper
• Extreme hot and humid or cold and dry environments
The size limitation for duplex printing is shown in Figure 5-1.
5-1