Xerox Document WorkCentre 450c User Manual page 95

Changing the default settings for
sending faxes
Using the ControlCentre software on your PC, you can
easily change the default settings for sending faxes. The
WorkCentre 450c is configured with the following factory
defaults for sending faxes:
Fax Out
Options
Setup/Comm
Options
Phone Line
Dialing Options
Option
Add cover page
Include send header
Include cover page and send header No
Retry failed faxes
Always send from memory
If memory fills
Fax number
Name
Date format
Time format
Maximum fax speed
ECM (error correct mode)
Redials
Redial interval (min)
Pause length (secs)
Dial mode
Detect dial tone
Default setting
No
Yes
Yes
Yes
Continue fax job
User specified
User specified
MM/DD/YY
12-hour
14400 bps
Yes
5
5
2
Tone
Yes
95