Xerox Document WorkCentre 450c User Manual page 42

Using the Setup Wizard to select
your fax options
The Setup Wizard helps you select basic options for
sending and receiving faxes. You may have run the wizard
after you installed your software to select your fax options.
You can run the Setup Wizard at any time to change your
fax options.
Note FCC and Communications Canada regulations
require you to enter the WorkCentre's fax number. Make
sure you provide the number before using the WorkCentre.
1. Turn on your PC.
2. Do one of the following:
• In Windows 95, double-click the WorkCentre icon
on the taskbar. Click the WorkCentre icon located in
the upper left corner and then click Setup Wizard.
• In Windows 3.1 or 3.11, double-click the
WorkCentre icon on the desktop with the left mouse
button and then click Setup Wizard.
3. Follow the instructions on your screen to select the fax
options you want.
42