Xerox Document WorkCentre 450c User Manual page 88

Xerox user guide document workcentre 450c
Hide thumbs Also See for Document WorkCentre 450c:
Table of Contents

Advertisement

5. Repeat steps 3 and 4 to until you've entered the
complete number.
6. Press START.
Faxing long documents
If the document you want to fax is longer than 40 inches,
you must use the WorkCentre's long original feature. This
feature lets you fax a long document without causing a
paper jam or an error condition. After you've faxed the
document, the long original feature is turned off.
If you do not use the long original feature to fax a long
document, the WorkCentre stops scanning the document
and sounds an alarm. Press the START key to continue
scanning the document.
1. At the WorkCentre, load up to 20 pages face down in
the document tray.
2. Press MENU.
3. Press ENTER to select [Fax job].
4. Press 5 [Advanced] and ENTER.
5. Press ENTER to select [Long original].
6. Press RIGHT ARROW to display [yes] and ENTER.
7. Enter the fax number and then press START.
88

Advertisement

Table of Contents
loading

Table of Contents